Fast booking Mot Reading from Mot-Centre? Keeping your tires in good shape is essential for your safety and of others on the road. With only a few tire maintenance tips, you can prolong the life of your tires and ensure your safety on the road. The first thing you can do is to check the tire pressure. This is something that you can do yourself without a mechanic. You will find the correct tire pressure for your car either in the owner’s manual or the tire placard located on the doorjamb. Experts also recommend getting your tires rotated every 6,000 or 8,000 miles. You can get your tires rotated when you take your car in for oil changes. A mechanic can also inspect the alignment of your tires.
Without a valid MOT, your car is not considered roadworthy; you won’t be able to renew your vehicle tax or insurance, and in short, you won’t be able to drive your car. What work is carried out in an MOT? Whilst the MOT does not cover the condition of the engine, clutch or gearbox, it does look at other key components of your car, so you need to keep on top of your car’s maintenance in order to pass.
Visit a place you know is reputed and if it’s not an authorized garage for your car brand, ensure the technicians use the approved materials, for instance the exact grade of oil, or replacement parts bearing the exact numbers approved by the car manufacturer. This not only ensures the best results and reliability, but will also comply with any warranty the car may be under, Also make sure you retain all the bills and service receipts that bear the above details. Whoever you entrust your car with, make sure they are careful workers. If they pay attention to the little details, you’ll know your car is in good hands.
Is the technician trained on your specific vehicle make? Cars and trucks today are extremely complex machines, and their unique characteristics vary heavily from brand to brand. Making certain that your technician has obtained the proper training for your specific vehicle is crucial since special tools and procedures — many of which are not easily available to the “average” auto mechanic — are required to correctly service your auto. Read additional details at Book mot online.
Not every chip or crack on a windscreen will cost you an MoT certificate, as it’s all down to location. The details may seem complicated, but as a rule of thumb you can get away with chips smaller than 10mm in front of the driver. Any damage bigger than 10mm in front of the driver – and also in the glass area swept by the wipers – will be an MoT fail. Elsewhere on the glass, damage has to be larger than 40mm to constitute an MoT fail. Wiper blades must be in good condition – not perished or damaged – and clear the screen effectively. The washers must work too, and the MoT tester is within their rights to issue a fail if you haven’t topped up the washer bottle or unblocked dirty washer jets with a pin!
An MOT certificate confirms at the time of the test your car met the minimum road safety and environmental standards required by law. It doesn’t mean your car will remain roadworthy for the following 12 months. You still need to make sure you maintain your car well, including regular servicing. Make sure you’re not caught out by any of the five simple reasons for a fail shown above, then inspect your car against our 11-point checklist below. If you find any problems in the following areas, you can fix some yourself to help keep garage costs down.
Your car is more than four wheels; it’s been through a lot with you. You need to know that you can rely on it. Reading Service & MOT Centre are experts at servicing all makes and models of cars, we’ll help keep your car running as well as the day you bought it. Are you selling your car? Nothing devalues a car more than an incomplete service book. A fully stamped book shows prospective buyers that you’ve taken good care of it. We provide a thorough service from experienced mechanics, and that all important stamp in your book. Read more information on here.
Probably the quickest and easiest test to do, and chances are that if this didn’t work, you’d already be aware of it and have had the fault fixed. So, as you’re doing your full pre-MOT checks, be sure to check the horn. The oil check is an important part of an MOT because without it, the garage will not be able to test emission levels. You can check this by taking a quick look under the bonnet. As you would when checking the brake fluid, do this test with the engine off and cool and the car parked on a flat, even surface. Locate the dipstick and pull it out, then wipe off any excess oil to ensure that you’re starting with a clean stick. Next, dip the dipstick back in and remove once more. You should see the oil sitting between the ‘min’ and ‘max’ marking on the dipstick. If you don’t, it’s time to top up your oil.