Metric cable gland and PG cable glands reviews? The areas of application of cableglandsonline.com EMC fittings range from machine and plant construction applications to telecommunications and airports up to use in hybrid vehicles – to name only a few. In the automotive sector, they are primarily used in hybrid and electric vehicles, but also in conventional vehicles to protect the sensor and on-board electronics systems from electromagnetic interference.
There’s a world of choices out there and unfortunately no one-size-fits-all option. But it does mean that you can custom select a cable gland based on your parameters. And to do that, you first need to consider a range of environmental and application factors. It doesn’t matter whether you’re working in aerospace, industrial, marine, power and utility, telecommunications or any other key industry. What’s important is identifying the core application environment of your cable gland.
Pg thread form of a German conduit pipe thread (DIN 40430) Unit: mm The screw thread referred to as a Pg 13.5 is a German DIN standard 40430 conduit pipe thread type. The thread angle is an 80 ° included angle and is similar to the JIS standard JIS C 8305 for thin steel conduit threads. Common applications for cable glands include aerospace, cleanroom, fire protection, industrial, marine, panel or enclosure, power or utility, railway, and telecommunications. Cleanroom cable glands: Suitable for use in a cleanroom environment with the associated properties of maintaining positive pressure, prevention of dust and fluid ingress, etc. Read more details on PG Threaded Cable Gland.
The CMP E1FX/M cable gland is suitable for use with all forms of equipment protection permitted in Zone 1 provided always that the prevailing code of practice, installation and maintenance is observed ie. IEC60079-14. Locate the cable gland Armour Cone ensuring the correct side of the cone is outermost – grooved for braid/tape armour and stepped for SWA cables. Pass the cable through the cable gland until the wire armour is engaged with the cone. Spread the wire armour evenly around the cone.
What is a Barrier Gland? Barrier glands are similar to normal glands, except a compound sealant material is used to ensure the inside of the cable is gas tight as well as the outside. When Should a Barrier Gland be Used? BS EN60079-14 Electrical Apparatus for Explosive Gas Atmospheres Part 14 – Electrical Installations in Hazardous Areas (other than Mines) provides a selection process for deciding if a barrier gland is required. There are various options to consider, however if the hazardous gas require IIC apparatus, or if the volume of the enclosure is greater than 2 litres then it is likely you will need to use a barrier gland. IIC apparatus is generally associated with Hydrogen.
CableGlandsOnline.com offer a wide selection of cable glands and cable ties to fit your needs. All of our cable glands meet IP68 specifications as liquid tight and are resistant to low level acides and alkalis. These cable glands are also designed for install well. Here are you can find a full sizes of all kinds of cable glands. Whether your application requires metric, npt or pg or other applications. You will find what you need here. Source: here.