Awesome high temperature paint and rust remover online shopping today? POR-15 Rust Preventive Coating is a high performance coating designed to paint directly on prepped rusted or seasoned metal surfaces to stop rust permanently. POR-15 Rust Preventive Coating is non-porous and seals and protects many surfaces from water, chemicals, salt, and other corrosive contaminants and is able to be painted over rust. POR-15 Rust Preventive Coating is an effective anti-corrosive and rust preventive coating that offers superior chemical resistance due to its dense, cross-linked molecular composition and non-porous attributes.
POR-15 Alloy Prep Soft Metal Etching Rust Neutralizer (formerly AP-120 Metal Prep) is designed exclusively for use with our 2K Urethane Clear, Alloy Prep guarantees perfect adhesion of 2K Urethane to any metal surface, especially chrome or polished aluminum, where good adhesion is often difficult to achieve and where other solutions may discolor. Alloy Prep is non-flammable with no noxious fumes. Wear rubber or latex gloves when using.
POR-15 Rust Remover will safely remove light to even heavy rust completely from metal surfaces and will not affect plastic, PVC, Viton, or most paints. One gallon derusts several hundred pounds of heavily rusted steel, this equates to around 1/2 to 3/4 pounds of dry rust removed per gallon. Rust Remover will not harm unrusted steel and is safe on other metals. Rust Remover has no fumes or bad odors and no VOCs. No sanding or scrubbing required. POR-15 Rust Remover works in as little as 20 minutes for light rust or overnight for heavy rusted metal. All of the rusted areas must be submerged in the Rust Remover for it to work. When all of the rust has been removed, rinse the metal pieces with water. POR-15 Rust Remover works in as little as 20 minutes for light rust or overnight for heavy rusted metal. For best results use POR-15 Cleaner Degreaser to clean parts before using POR-15 Rust Remover. See even more info at https://por15.com/products/rust-remover.
Remove all four wheels from vehicle. Calipers don’t need to be removed. Don’t remove brake line. Clean surfaces to be painted with POR-15 Cleaner Degreaser. Spray on the cleaner and brush the dirt, grease and grime with a small scrub brush or toothbrush. Wear protective gloves and glasses when cleaning your calipers. Read directions on POR-15 Cleaner Degreaser container before using. Rinse cleaned caliper thoroughly with water and dry with clean towel. Now apply POR-15 Metal Prep and keep surface wet for 20 minutes and then wash off POR-15 Metal Prep with water and dry thoroughly.
Rust conversion products claim to change the chemical nature of rust and convert it to a more stable element that won’t rust again. History of the failure of these products is well documented; most simply don’t work for more than a few months at best, and they are subject to the same chipping and cracking that occurs with ordinary rust coatings. POR-15 works because it chemically bonds to rusted metal and forms a rock- hard, non-porous coating that won’t crack, chip, or peel. It keeps moisture away from metal with a coating that is strengthened by continued exposure to moisture. Read additional details at https://por15.com/.