Cylinder downlight manufacturer and supplier right now: Confirm what design pattern for the whole system you prefer. There are about 4 design shapes for the whole lighting system- L shape, I Shape, parallel lines Shape, and Square shape. Square shape. It is suitable for living rooms, and offices. U Shape: Mainly used for living room. L Shape: Good for use in corridors, living rooms, and cloakrooms. I Shape: For the living room, dining room, and kitchen room. Choosing a suitable magnetic track rail: Recessed magnetic track: It is suitable for new houses that have not yet suspended ceilings. It is necessary to make grooves and pre-embed tracks, and then press them with the ceiling. Trimless magnetic rail: It is used in the room where the ceiling has been made, and the hole is directly fixed on the ceiling plasterboard. Surface / Pendant magnet track: Mainly used for places that are without false ceilings or not good for making plasterboard such as supermarkets, offices, etc. Read more info at downlight manufacturer.
What is LED landscape lighting, and how does it work? LED Landscape Lighting is the replacement for traditional high-pressure sodium (HPS) and metal halide lights. It’s a fixture designed as an alternative light source for outdoor lighting. LED landscape lighting has built-in semiconductors called LEDs (Light Emitting Diode) that emit light when an electric current passes through them. The electrons are forced into higher energy levels when exposed to ultraviolet or blue rays but gradually return to their normal state with the release of energy through the emission of particles that make up light. In short, LEDs provide more light and use less power than traditional filament lighting.
Wattage is a measure of the energy consumption of a lamp, not the amount of light it emits. For led floodlights, generally 10W to 1000Watt optional. For small places, it is enough for 10W-50Watt, they are suitable for installation at a height of 3-5 meters. Then the higher wattage is better choices for higher place. The beam angle of the led flood lights are wide or narrow, and the range is between 3°～140°. Different application places have different requirements for the luminous angle. For some trees, landscapes or building outlines, it is more suitable to choose a narrow beam angle led floodlights, which can play a key part of the lighting effect, highlighting the characteristics of the illuminated object. However, for large spaces, then the wide distribution floodlights will be much better, such as 120° or 70*140°.
GRNLED is a commercial Led floodlight manufacturer, supplier, and factory in China, We can accept OEM/ODM floodlights orders for commercial application. The color temperature can be single color such as 3000K Warm white, 4000K daylight, 6500k cold white, Green / Purple / Orange / Red / Blue, or to be RGB LED Floodlights. Widely applied for commercial outdoor places such as parking lots, backyards, schools, football fields, tennis court lighting, basketball lighting, etc. Stronger R&D: We are always keeping innovation in led lights according to markets trend. It is ok to research and development based on your ideas and advice.
There are 3 types of magnetic tracks for the smart dimmable magnetic track light system: recessed magnetic track for embedded installation or trimless installation, surface mounted magnetic tracks for surface ceiling or wall mounted, and suspended installation with steel ropes. Black magnetic track, white magnetic tracks options. Each magnetic rail track can be cut off freely. The standard length for magnetic tracks is 1000mm, 2000mm, and 3000mm.
Explosion proof flood LED light: It refers to a floodlight used in dangerous places where combustible gas and dust exist, and can prevent arcs, sparks and high temperature that may be generated inside the lamp from igniting combustible gases and dust in the surrounding environment, so as to meet the requirements of explosion-proof. It belongs to a special kind of lamp, and its protection level is higher than that of conventional floodlights. Suitable for various indoor and outdoor operations and construction sites such as flammable and explosive places, oil fields, offshore oil platforms, ships, metallurgy, petrochemicals, etc.
Durability: Make sure the lights are made of durable materials that can withstand the elements. Warranty: Make sure the lights come with a good warranty in case of any defects. a good solar street light manufacturer or supplier will provide 3years warranty at least. Which sensor is used in solar street light? A light-dependent resistor (LDR) is typically used in solar street lights to detect the presence of light. The LDR is used to detect the amount of light present and to turn the street light on or off accordingly.
The magnetic pendant light is a cylinder downlight with hanging ropes for suspended installation as decorative lighting, It is generally used as auxiliary lighting and is mostly used in the study room, bedside table, above the dining table. The CREE/OSRAM/PHILIPS COB chip brings a perfect lighting performance, Magnetic track lighting is a linear track system with magnetic rail and removable magnetic lights, the entire magnetic track lighting system is driven by low-voltage DC24V or DC48V.On the low-voltage magnetic guide rail, various types of lamps such as magnetic line lights, magnetic spotlights, and magnetic chandeliers can be safely combined, freely moved and disassembled. Just read this blog to know the details about it if needed.
What are the advantages of solar powered street lights? Cost Savings: Solar-powered street lights are much more cost effective than traditional street lights, as they require no electricity or wiring. Eco-Friendly: Solar-powered street lights are powered by renewable energy sources, making them an environmentally friendly option. Low Maintenance: Solar-powered street lights require minimal maintenance, as they do not require any wiring or electricity. Durability: Solar-powered street lights are designed to withstand harsh weather conditions, making them a durable and reliable option.
Second, the Led driver problem. The main reason is that the electrolytic capacity inside the power supply is insufficient, and the output current and voltage of the lighting system cannot be controlled stably, which makes the LED flood light flashes that turn on and off. Fourth, the floodlight is flooded. Floodlights are often used outdoors, if the waterproof strength is not enough, water ingress is likely to occur. Once water enters, it may cause the LED lamp beads to rust and break. As a result, flickering occurs. Read even more information on grnled.com.
GRNLED and GOLUMEN is a One-Stop led light supplier, factory, and manufacturer, providing most of the different types of led lights. Commercial lighting: Led downlight, LED Track light, led panel light, LED Linear lights. Industrial lighting: High Bay led lights, LED Tri-proof batten lights, Outdoor Lighting: LED Street Lights, LED Flood lights, Stadium lights. Landscape lighting: LED wall light, bulkhead light, Bollard lights, inground lights, underwater lights, pillar lights, etc. Solar LED Lights: Solar floodlights, solar street light. Smart Lighting: Zigbee smart downlight, smart Magnetic track light system.